|
Post by a on Jul 27, 2013 12:25:48 GMT -8
Mircea, good idea. Tested successfully on 2002 Nissan Sentra 4 cyl Gasoline. 1.8L Clone Elm 327 with Nexus 7 Enhance Nissan ECM + OBDII Generic
|
|
|
Post by spaceace on Jul 31, 2013 4:37:19 GMT -8
2002 Nissan Xterra (WD22) 3.3 Auto (VG33E) ELM327 Bluetooth generic v1.5 (clone)
03_Fuel System 1 03_Fuel System 2 04_Load 05_Engine Coolant Temperature 06_Short Term B1 06_Short Term B3 07_Long Term B1 07_Long Term B3 08_Long Term B2 08_Long Term B4 09_Long Term B2 09_Long Term B4 0C_Rpm 0D_Vehicle Speed 0E_Ignition Timing 0F_Air Temperature 10_Mass AirFlow 11_Throttle Position 14_O2 B1S1 % 14_O2 B1S1 Volts 15_O2 B1S2 % 15_O2 B1S2 Volts 18_O2 B2S1 % 18_O2 B2S1 Volts 19_O2 B2S2 % 19_O2 B2S2 Volts 21_Distance While MIL On
|
|
|
Post by memphistiger on Sept 9, 2013 15:16:34 GMT -8
Hello all.
Confirmed this works on 2000 Infiniti I30 which has the same drivetrain as '00/01 Nissan Maxima Also confirmed that timing advance feature works.I still cant get the ABS to work though. Engine:VQ30DEK(Gasoline) v6 3.0 tranny:RE4F04B BT adapter: Vgate mini ELM327 phone: Mytouch 3G slide
|
|
|
Post by Alex Kun on Sept 16, 2013 2:09:12 GMT -8
Hello! I am from Russia. I have a Nissan Sunny FB15, 07.2000 years. And this program does not work with the adapter connects but with no ECU. Although, there is another program that works.But like Car Gauge.
|
|
|
Post by Subs on Sept 26, 2013 6:23:16 GMT -8
Hello all. Confirmed this works on 2000 Infiniti I30 which has the same drivetrain as '00/01 Nissan Maxima Also confirmed that timing advance feature works.I still cant get the ABS to work though. Engine:VQ30DEK(Gasoline) v6 3.0 tranny:RE4F04B BT adapter: Vgate mini ELM327 phone: Mytouch 3G slide Hey Try accessing ABS when your ignition is in the On position but engine is off.
|
|
blue
New Member
Posts: 3
|
Post by blue on Oct 4, 2013 21:19:31 GMT -8
Worked with 2004 Sentra Spec V using a cheap blue tooth OBD2 connector.
The typical Sentra mods create allot of vibration especially with the AC on. Using the "Self Test" feature the idle can be set and saved...bumping the idle RPM +75 really smoothed out the engine.
Nice work!
|
|
|
Post by steelblade on Oct 16, 2013 12:05:35 GMT -8
Working with ELM327 clone adapter v1.5 on the following vehicles:
2007 Nissan 350Z Z33 Manual Transmission VQ35HR Engine Generic OBD and ABS modules
2008 Nissan Pathfinder R51 Automatic Transmission YD25DDTi Engine Generic OBD, TCM and ABS modules
|
|
|
Post by Bryant on Nov 5, 2013 0:09:03 GMT -8
Work on Nissan Lafesta 2006 2.0L
ELM-327 bluetooth
HTC one
Is there any user manual for this wonderful apps?
|
|
|
Post by johnpjackson on Jan 11, 2014 12:14:12 GMT -8
I've got a 2006 Nissan Xterra Off Road. I'm using CarGauge Pro with an OBDLink MX. I am able to communicate with these systems in my vehicle:
ECU AUTOTRANS ABS
I am unable to communicate with both listed instances of BCM and the 4WD controllers. Can I provide you with any log or debug info which might help you figure out how to get those working for my vehicle? Thanks either way for a fantastic tool!!
|
|
|
Post by Issac on Jan 12, 2014 10:07:12 GMT -8
I've got a 2006 Nissan Xterra Off Road. I'm using CarGauge Pro with an OBDLink MX. I am able to communicate with these systems in my vehicle: ECU AUTOTRANS ABS I am unable to communicate with both listed instances of BCM and the 4WD controllers. Can I provide you with any log or debug info which might help you figure out how to get those working for my vehicle? Thanks either way for a fantastic tool!! Some of the modules are not compatible or wired to OBD2 Port.
|
|
|
Post by johnpjackson on Jan 13, 2014 17:33:08 GMT -8
Hi Isaac! Thanks for the reply! One thing I can add to your response then is that I've watched the tech at the dealership connect his hardware Consult II equipment to the OBD2 port and pull codes from the 4WD system. I had a problem with the electric locking rear differential at one point (the indicator lamp on the dash would sometimes come on for no apparent reason and the tech was able to pull codes that showed it had happened. I'm assuming the codes came from the 4WD system, I'd say. Otherwise, do you have any knowledge of how a Nissan tech would normally gain access to the 4WD and BCM controllers, if not through the OBD2 port? PS - this reply disappeared for some reason, I'm not sure why, so I'm trying it again.
|
|
|
Post by Issac on Jan 13, 2014 19:40:24 GMT -8
Hi Isaac! Thanks for the reply! One thing I can add to your response then is that I've watched the tech at the dealership connect his hardware Consult II equipment to the OBD2 port and pull codes from the 4WD system. I had a problem with the electric locking rear differential at one point (the indicator lamp on the dash would sometimes come on for no apparent reason and the tech was able to pull codes that showed it had happened. I'm assuming the codes came from the 4WD system, I'd say. Otherwise, do you have any knowledge of how a Nissan tech would normally gain access to the 4WD and BCM controllers, if not through the OBD2 port? PS - this reply disappeared for some reason, I'm not sure why, so I'm trying it again. Your message has been moved and the subject name is 4WD Nissan below the sticky. This section is for working Nissan cars.
|
|
|
Post by bipmartinez on Feb 11, 2014 0:37:13 GMT -8
works on Nissan Cube Z11 2002-2004
Tested using Samsung s4 and Galaxy Tab
working on engine gasoline
|
|
|
Post by i1k on Mar 7, 2014 13:59:07 GMT -8
Works on: 2000 Nissan Maxima SE, 5 spd MT Dongle: Vgate Elm327 Mobile: HTC ThunderBolt (ADR6400L): 1Ghz Processor, 3.0 Bluetooth, Android 4.0.4
Great app Isaac! Worked on/off cylinder check, advanced timing, idle air learn. Haven't tried changing idle RPM yet.
Newbie at this and would sure like to have a user manual for more in-depth diagnostics after pulling codes.
|
|
|
Post by vinnied55 on Mar 8, 2014 1:34:32 GMT -8
hey Issac i just bought your car gauge pro app . the app is sorta hard to figure out. i have a 2012 nissan altima 2.5 s chk light comes up po101 . im using PLX Kiwi 2 Bluetooth OBD II it only loads under all (OBD ll Generic) hit clear light but stays on my other app torque2 pro it clears it .well i got ur app cuz people say you can relearn the ecu like mass air flow sensor. is there anyway ur app can relearn sensors on 2012 altimas. also 60% of the time on ur app this pops up device connection fail java.io.loexception: connection refused . can up please help me with info or a update for gauge pro app that would work with 2012 nissan altima.the app is on my LG optimus L9 version 4.1.2 thank you for your time and i really hope you can resolve my issues . vinnie
|
|