jwatz
New Member
Posts: 15
|
Post by jwatz on Jun 15, 2013 19:04:25 GMT -8
Saw the info in the update, and the list feature make idle rpm adjustment a lot easier. Anyway to go negative? We should be able to adjust from 13 to 17 degrees (15 is factory setting). I'm ecstatic that I can up it 17, but others might want to retard it a degree or two. Thanks again for such an amazing little tool!
|
|
|
Post by Issac on Jun 16, 2013 8:50:00 GMT -8
Saw the info in the update, and the list feature make idle rpm adjustment a lot easier. Anyway to go negative? We should be able to adjust from 13 to 17 degrees (15 is factory setting). I'm ecstatic that I can up it 17, but others might want to retard it a degree or two. Thanks again for such an amazing little tool! There is a long unnecessary numbers in the list for RPM Adjustment which will be removed. Can you please verify where the stop point is? My guess it will work as high as 20-30 range. I am also concerned what will happen from 230-255 range? As for Timing, List range 0-2 is as indicated 0 degree (Back to default?), + 1 degree from default, + 2 degree from default. Please try 255 and 254 for timing adjustment. That might be -1 Degree, -2 Degree. Thank you
|
|
jwatz
New Member
Posts: 15
|
Post by jwatz on Jun 16, 2013 8:54:28 GMT -8
Idle RPM stops at +250. Ignition timing only allows a range from 0-2. I can get you another debug log later in the day if you want it.
|
|
|
Post by Issac on Jun 16, 2013 9:40:46 GMT -8
When you say +250. Is it 250 Corrected Idle Rpm? If so, can you click on the list and report the number. I do not believe all of those numbers in the list applies to the adjustment. I am assuming each value = x 12.5 Rpm. If you set the Rpm list at 3 then it should increase (3 x 12.5) = 37.5 Rpm. If you click on 30, 40, and so on, does it actually change the Rpm? That is what I needed to know.
Also, when you have the chance try the 254, 255 for Timing, unless you stated 0-2 works only.
|
|
jwatz
New Member
Posts: 15
|
Post by jwatz on Jun 16, 2013 9:45:15 GMT -8
When you say +250. Is it 250 Corrected Idle Rpm? If so, can you click on the list and report the number. I do not believe all of those numbers in the list applies to the adjustment. I am assuming each value = 12.5 Rpm. If you set the Rpm list at 3 then it should increase (3 * 12.5) = 37.5 Rpm. If you click on 30, 40, and so on, does it actually change the Rpm? That is what I needed to know. Also, when you have the chance try the 254, 255 for Timing. Yes, corrected. I believe 250 was the cutoff, but i will check again. I will try the timing as well. I'll send the debugs and snap some screenshots of what it's reading after. It won't be until later in the day though.
|
|
|
Post by erbolius on Jun 16, 2013 17:15:39 GMT -8
What about idle air control valve adjustment? Have you opportunities to perform it in this application?
|
|
|
Post by cauzindrama on Jun 16, 2013 18:47:27 GMT -8
I'm from the Maxima.org site and gotta say this app is priceless. I would love if we could lower the RPMs. Seeing as for whatever reason the idle relearn feature always say test not OK.
|
|
|
Post by erbolius on Jun 16, 2013 20:03:46 GMT -8
I'm from the Maxima.org site and gotta say this app is priceless. I would love if we could lower the RPMs. Seeing as for whatever reason the idle relearn feature always say test not OK. the same thing i have Maxima 2003 but vq30de without catalityc converter and o2 sensors! middle east version of maxima! it could be awesome to adjust IACV for correct adjusting of throttle valve and rpm!
|
|
|
Post by Issac on Jun 16, 2013 20:47:30 GMT -8
What about idle air control valve adjustment? Have you opportunities to perform it in this application? Hi, There is Idle Air Learn and Idle Rpm Adjustment option. I have been told it works successfully. Idle Rpm Adjustment will allow up to 250 Rpm gains. You will not be able to decrease Idle Rpm which is not allowed.
|
|
|
Post by Issac on Jun 16, 2013 20:56:52 GMT -8
I'm from the Maxima.org site and gotta say this app is priceless. I would love if we could lower the RPMs. Seeing as for whatever reason the idle relearn feature always say test not OK. Hi, You will not be able to lower Rpm with Idle Rpm Adjustment. You can gain up to 250 rpm. Please send a debug log for any problems you are experiencing by enabling it under preference, try using the feature that is not working, then exit app and send log to Email. Perform Idle Relearn when the coolant temperature reaches above 65 degree Celsius, otherwise it will not work or possibly, your vehicle does not support it. In the future version, It will check for self test that are supported and list them on the menu.
|
|
|
Post by Issac on Jun 16, 2013 21:05:18 GMT -8
Next version, there is some improvements with Rpm/Timing Adjustment and bug fixes.
|
|
jwatz
New Member
Posts: 15
|
Post by jwatz on Jun 18, 2013 15:11:30 GMT -8
Negative ignition timing confirmed working. Sorry I never got back in touch, been busy with work lately. If you need a guinea pig for anything I can help you out this coming weekend.
|
|
|
Post by djhackstyle on Jul 12, 2013 7:25:54 GMT -8
What about idle air control valve adjustment? Have you opportunities to perform it in this application? Hi, There is Idle Air Learn and Idle Rpm Adjustment option. I have been told it works successfully. Idle Rpm Adjustment will allow up to 250 Rpm gains. You will not be able to decrease Idle Rpm which is not allowed. Adjusted timing +2 works great on my 03 maxima and my friends 02 maxima. It would be really great to be able to decrease the idle rpms or be able to set the rpm to a specific value. Alot of cars have problems with rpms being too high especially when being modified.
|
|
|
Post by Issac on Jul 12, 2013 19:59:33 GMT -8
You can try cleaning the throttle body and perform idle relearn.
Idle Adjustment is intended/designed for rpm gains only.
|
|
|
Post by memphistiger on Sept 9, 2013 15:22:27 GMT -8
Confirmed ignition timing adjustments,up or down, work on 2000 Infiniti I30.
|
|