scoba
New Member
Posts: 4
|
Post by scoba on Mar 16, 2013 1:20:28 GMT -8
Why i can not use analog RPM? Why I can use digital only RPM? And one more: can you make square skin for digital gauges? Thanks.
|
|
|
|
Post by Issac on Mar 16, 2013 9:57:21 GMT -8
|
|
scoba
New Member
Posts: 4
|
Post by scoba on Mar 16, 2013 20:36:05 GMT -8
Nissan->Nissan Engine (Gasoline)->ECU adress: 10->RPM pid
Program gives me a message that i can use only digital gauge for this parameter.
|
|
scoba
New Member
Posts: 4
|
Post by scoba on Mar 16, 2013 20:40:35 GMT -8
And one more quastion: how can i get real value of maf sensor? For example 3 g per a second? Thanks!
|
|
|
|
Post by Issac on Mar 17, 2013 6:08:31 GMT -8
OK, next version will correct the Rpm.
Nissan ecm have 2 maf pids in g/s. If it does not show in the list, then your ecm does not support it.
|
|
scoba
New Member
Posts: 4
|
Post by scoba on Mar 20, 2013 1:22:05 GMT -8
Nissan ecm have 2 maf pids in g/s. If it does not show in the list, then your ecm does not support it. Other programs (for example hobdrive) can show this parametr in g/s. But car gauge show only maf sensor voltage. |
|
|
|
Post by Issac on Mar 20, 2013 7:47:10 GMT -8
Please enable debug log in the preference, connect to the Nissan Ecm couple of times, then exit app and send the debug log to obdscantech@usa.comI need to look at the supported pids in the log. |
|
|
|
Post by Issac on Mar 20, 2013 7:50:13 GMT -8
Forgot to mention. Does your vehicle connect to OBD II Generic? There should be Maf in g/s with OBD II Generic.
A debug log connecting to the OBD II Generic is needed, also. Thanks
|
|
