upx
New Member
Posts: 3
|
Post by upx on Jan 6, 2013 13:10:59 GMT -8
Hello, this is my first post here, sry my bad language.
I own Nissan Micra 2008 1.5 Dci, and i have some prob with my ABS(the abs light and handbrake warning lights is on),when i choose the ABS on Car Gauge PRO it only gives me error"no data, or invalid data.
My adapter is OBDII ELM327 - Bluetooth adapter v1.4
It is possible to clear those abs codes at all? I saved three debug logs if you´d like to watch them?
T:Timo
|
|
|
|
Post by Issac on Jan 6, 2013 14:47:59 GMT -8
Hello,
Please upload the debug log. If your ABS is wired up to the K line(Pin 7) on the OBD2 Connecter, then it should be supported. Do you have pin 6 and 14 available at the OBD2 connector? If your system is CAN bus then it is not supported at this time.
Have you tried the Diesel ECM?
-Issac
|
|
upx
New Member
Posts: 3
|
Post by upx on Jan 7, 2013 4:05:04 GMT -8
hello, here is the logs. I´ll check the pins later and ECM doesn´t work also. Timo Attachments:
|
|
|
|
Post by Issac on Jan 7, 2013 9:32:53 GMT -8
Hello,
Log is incomplete. Delete all of the Debug log in your directory. Please start up app, go to Preference and enable Debug Log, Connect few times using ABS and ECM Diesel, then exit app and send log again.
Thank you
|
|
upx
New Member
Posts: 3
|
Post by upx on Jan 8, 2013 8:46:12 GMT -8
Hello and thanks for advices. Nissan -> ECM (diesel) says not supported and ABS says negative or no responding from ECU. I´m not sure about the connection lines,but i think the abs is connected with can-bus. -Timo Attachments:
|
|
|
|
Post by alflash on Jan 8, 2013 12:12:23 GMT -8
If yours Micra is K12, ABS ECU use for diagnostic pin #7 of DLC, and CAN-bus to communicate with other devices:
...
Alas, I can not do attachment
|
|
|
|
Post by Issac on Jan 8, 2013 13:53:19 GMT -8
Thank you for the log.
Aflash is correct. The logs show your ECM is Canbus and ABS is KWP2000 (K line).
Every ABS command request returned Negative.
Contact my email. I have instructions for you to try with a Elm Terminal.
|
|
|
|
Post by Issac on Jan 8, 2013 14:00:18 GMT -8
|
|
|
|
Post by jakson on Feb 15, 2013 8:47:41 GMT -8
What do you think Mercedes or BMW can we use for family car. Anyway I don't think so and I didn't ever see that anyone is using Mercedes for his family use.
I have My own car rental and I often use Ford and Nissan companies cars. Which they specially design for the family purpose.
|
|
|
|
Post by Micra user on Oct 20, 2013 4:09:20 GMT -8
Hello,
Didn't want to create new topic - since trouble is the same. Cannot get any data (faults to be exact) from my ABS unit on Nissan Micra 1.4 gasoline (K12). The problem is the same as described above.
|
|
|
|
Post by Issac on Oct 20, 2013 9:01:45 GMT -8
Hello, Didn't want to create new topic - since trouble is the same. Cannot get any data (faults to be exact) from my ABS unit on Nissan Micra 1.4 gasoline (K12). The problem is the same as described above. Hi, If the ABS is wired up to the 14 pin diagnostic connector, then it is not compatible with Elm Device. Check the wiring diagram to verify which connector the COM lines are used with. |
|
