|
Post by charliext on Jan 3, 2013 13:07:43 GMT -8
Hi Issac, yes have not got as far as gauges yet, as I have been concentrating on raising as much data out of Consult II as possible, so I am not familar with that area yet. If I save guages that will save PIDs then that would work, will let you know on that. Just got up date, checked version .62 now. Will go give a quick read on cold engine. Post shortly. Thanks
|
|
|
Post by charliext on Jan 3, 2013 13:53:10 GMT -8
Debug Log - Engine off/cold Attachments:
|
|
|
Post by charliext on Jan 3, 2013 13:54:29 GMT -8
Debug Log - Engine on/cold Attachments:
|
|
|
Post by charliext on Jan 3, 2013 13:55:48 GMT -8
.cglog - Not sure whats happened some data appears missing ? Will give it another go tommos Attachments:
|
|
|
Post by Issac on Jan 3, 2013 16:18:27 GMT -8
If the "No Data" ever happens again, then Please Enable Log and send it to me. Are you using Clone Elm 327?
Thank you
|
|
|
Post by charliext on Jan 4, 2013 8:00:38 GMT -8
ELM same as before. I did start debug before first like you said maybe I confused it See second debug log which was on same run as .cglog
|
|
|
Post by charliext on Jan 4, 2013 11:38:49 GMT -8
Deug log Warm engine at idle Attachments:
|
|
|
Post by charliext on Jan 4, 2013 11:40:01 GMT -8
Debug log Warm engine at 2000 RPM Attachments:
|
|
|
Post by charliext on Jan 4, 2013 11:42:24 GMT -8
.cglog Warm engine at idle Attachments:
|
|
|
Post by charliext on Jan 4, 2013 12:13:18 GMT -8
Hi Issac have posted the lasted set of readings, looking better ;D Couple of observations for you, I noticed the Raw Data fluctuates slightly when engine running, so reading will vary slightly. I think this is a feature of the app to read accuratley the Raw Data which is in smaller divisions of measurement than the CII data would be ? I have found it easier to navigate with just the menu launched for the menu button rather than the blue drop down bar. In part because if you want select anything from more it opens in a large index or menu than using than when when selected from the blur drop down bar. This is even more usefull if mounted on a window mount It is a bit frustrating that if you select various PIDs and then rotate the screen (phone) you have to reselect the PIDs another reason for using a window or dash mount. I do not know yet if this happens once the guages are selected. Let you know. Did you work out if INTAKE SWITCH (CGP) Raw Data was the same as INT/A VOLUME (CII) or is it reading a different output ?
|
|
|
Post by Issac on Jan 4, 2013 12:54:56 GMT -8
Couple of observations for you, I noticed the Raw Data fluctuates slightly when engine running, so reading will vary slightly. I think this is a feature of the app to read accuratley the Raw Data which is in smaller divisions of measurement than the CII data would be ? It all depends on the decimal place when converted. Tenths will probably not change significantly as compare to Hundreds. I have found it easier to navigate with just the menu launched for the menu button rather than the blue drop down bar. In part because if you want select anything from more it opens in a large index or menu than using than when when selected from the blur drop down bar. This is even more usefull if mounted on a window mount In order to take advantage with the new OS theme, the Menu button is eliminated on 3.1 and Newer Android Operating system. Older system will show both menu, but new OS will sow the Action Bar at the top of the screen.
It is a bit frustrating that if you select various PIDs and then rotate the screen (phone) you have to reselect the PIDs another reason for using a window or dash mount. I do not know yet if this happens once the guages are selected. Let you know. Improvements will be on the list. Here is what you can do for now. Create a Gauge Profile and save it. Go to Preference, Select Default Gauge ----> choose your profile.
When you start up the app, it will open up your profile and rotation will work as well. As for the OBDII Menu, that will be on the list for the future.Did you work out if INTAKE SWITCH (CGP) Raw Data was the same as INT/A VOLUME (CII) or is it reading a different output ? This value is in mg. I changed it to Raw because previously it was incorrect. These raw data is more complicated to figure out because it is a 2 byte format.
Thanks for your log.
|
|
|
Post by charliext on Jan 5, 2013 9:51:43 GMT -8
Debug log - Cold ignition on only. Attachments:
|
|
|
Post by charliext on Jan 5, 2013 10:19:35 GMT -8
.cglog - Cold ingnition on only Had time to set up a couple of guages and save profile, today. Also able to set MPH with metric units, etc Found it best to be keep to one guage per screen if on windscreen mount, if doing static test three seems to be ok. How do I set up digital readout ? The reason I tend not use the Action Bar, as although I do not have Blacksmiths hands, it is quite difficult to select on my screen, the icons are quite close together. Def User Manual will be a great help. Did you work out if INTAKE SWITCH (CGP) Raw Data was the same as INT/A VOLUME (CII) or is it reading a different output ? So "Intake Switch" corresponds Int/A Volume Attachments:
|
|
|
Post by Issac on Jan 5, 2013 10:54:48 GMT -8
I agree, keep the gauges below 3 per screen for Kwp2000/ISO9141.
There is 1 checkbox in the Gauge Center. Select it for digital type.
1 of 2 bytes are figured out on the raw data. Not ready for release.
|
|
|
Post by charliext on Jan 5, 2013 11:59:06 GMT -8
Well done ;D I have know idea how you do it, if it is wood or steel I can help, bytes are what what you get around the Great Lakes as far as I know
|
|