|
Post by DirtyDiesel on Jan 14, 2014 15:06:53 GMT -8
Hi there, I'm posting here because this is driving me crazy. I can't figure out how to access the Ford Enhanced diagnostic tests. More specifically the Diesel Glow Plug/Injector Buzz/Cylinder Contribution Tests. I've tried what I've seen in the demo video and I'm not sure if I've encountered a bug or I'm missing something. I'll go Menu>Connect>Ford>Powertrain>Scan All (though I've tried all of the other options individually)>Full auto scan (again, tried each option individually)>OBDII. It will state "connected" after a few seconds and take a few minutes scanning all of the available PIDs. Then, I'll go Menu>OBD Menu and the only options I see are Close, ListView Settings and DTC Libraries. Nothing else, where as other versions I have seen the Engine tests listed here. Am I missing something? Could my OBDII bluetooth adapter be unable to access these options? I've even tried this in offline mode and can't see any other options on this menu. I'm using a Samsung Galaxy S3 and a ELM 327 V-gate OBDII bluetooth adapter. Just updated to the newest version of Car Gauge pro today (3.66.12). Any help would be appreciated!
|
|
|
Post by Issac on Jan 15, 2014 15:29:27 GMT -8
I will look into this. My Menu seems to be showing.
|
|
|
Post by DirtyDiesel on Jan 16, 2014 13:20:54 GMT -8
I will look into this. My Menu seems to be showing. Thank you! This feature was one of the main reasons I bought the App. Disappointing not being able to use it. Also, sorry for posting this thread in the wrong section! Wasn't paying attention when I was searching to see if there was anyone having similar issues. If you like, I could record a video of what I'm seeing. Thanks again and let me know!
|
|
|
Post by Issac on Jan 19, 2014 9:58:55 GMT -8
I will look into this. My Menu seems to be showing. Thank you! This feature was one of the main reasons I bought the App. Disappointing not being able to use it. Also, sorry for posting this thread in the wrong section! Wasn't paying attention when I was searching to see if there was anyone having similar issues. If you like, I could record a video of what I'm seeing. Thanks again and let me know! The menu item will occur as you specified when the connection is disconnected. Was the gauge needle or gauge value changing after connecting?
|
|